Skip to content
Green marble nesting side tables with slim black frames; representative living room

Marble · Green

Green Marble Nesting Tables

Three green marble nesting table tops cut from the same slab, seated in black metal frames.

Stone type
Marble
Renk ailesi
Green
Finish options
Polished, Honed
Uygulama
Nesting Tables

Gallery

Installed

Three-piece green marble nesting tables installed at home, black metal frames in nested arrangement
Nesting table tops on the same green slab in the workshop after cutting
Polished yüzey
Close view of a green marble table top seated in its metal frame
Polished yüzey
The three nesting tops cut from one slab: kinship in colour and veining
Polished yüzey
The nesting table set arranged in the workshop, polished green surfaces
Polished yüzey

In detail

About this work

In a set of nesting tables three tops stand together, so the relationship between the pieces matters more than the look of any single top. The three tops in this set were cut from the same slab, from neighbouring regions: colour tone and vein character belong to the same family in all three. When pieces from different blocks are used, the difference in tone shows immediately once the three tables are side by side.

The tops are seated in black metal frames. Two dimensions are critical for stone seated in a metal frame: the bearing allowance of the top and the corner clearance. Because stone behaves differently from metal with heat and humidity, a few millimetres of clearance are left; without it the frame pinches the stone and a crack starts from the corner.

The edges were finished polished. A side table surface is not used as heavily as a dining top, so a polished finish is easier to look after here; even so we recommend coasters, since marble can etch locally where it meets acidic liquids.

For the green dining table top cut from the same slab, see the related product page.

Technical

Specifications

The technical values are typical ranges for the stone type; write to us for block-specific test report values.

Green Marble Nesting Tables teknik özellikleri
Application area Nesting tables
Set Three pieces from the same slab
Frame Black metal
Finish shown Polished
Material Natural marble
Typical density 2.60–2.70 g/cm³
Water absorption 0.1–0.4%
Compressive strength 70–120 MPa
Mohs hardness 3–4

Reference

Projects using this stone

From the catalogue

Similar products

Green Marble Nesting Tables için teklif

Tell us your dimensions, the area of application and your preferred finish; let us choose the slab together.

Get a Quote